juliamom2009

That looks like a good idea! Thanks for posting.

Those are great, Lightning! Thanks, and thanks for the love.

My preference is Bemberg: https://en.wiktionary.org/wiki/Bemberg

Other types of rayon can be ok, too, but I prefer the hand feel of the Bemberg. Hope that helps!

What is the fabric going to be? If it’s a cotton then I would suggest a freezer paper stencil and some fabric paint.
There are lots of online tutorials for freezer paper stencilling, or, if you have the Sandbox pattern it’s there too.
Have fun (we love Studio Ghibli films too)

It should work just fine. Things to think of: the neckline facing may show through too much with a thin knit. You could consider a full bodice lining layer if your fabric is really thin. Or maybe bind the neckline rather than use the facing.
As it is, it should look fine so long as you use a lightweight interfacing on the facing. You don’t want…[Read more]

Just going to work through your maths out loud…
Panel is 2 &3/4″ remove 1/4″ seam allowance from each side > remove 1/2″ = 2&1/4″.
Halve that: = 1&1/8″

Now, each side had a seam allowance with the panel, but that will stay to be the seam allowance for the side seam.

So, maths correct. The side seam will end up being in the middle of where the…[Read more]

Hello! The dress works great with knits, and I’ve seen lots of photos of it made with jersey, etc. I’ve even used sweatshirt fleece for it. If you check the Oliver + S Flickr group you’ll probably find lots of images, although I can’t comment on the weight of your fabric. You’ll have to be the judge of that one.

What country are you in Melanie @mpiltingsrud ? People local to you may be able to help with more affordable full size printing. Also, even if you can’t print the A4 pattern at home, maybe that would be a cheaper option at a print shop.
Good luck.

This is bad news indeed! Thanks for telling us.

By the time you baste the elastic then stitch the binding twice you’ll have no control as to whether you pierce the elastic or not.
I have no recollection of any problems with breakage or pulling loose, and tge coat was fine to be handed down once outgrown.
Use a short stitch length to attach them initially, then do the binding part as normal.
Good luck.

You could bind the shoulder seams, or I’ve shown here how I undid a bit of the quilting to tuck the edge under.
http://bartacksandsingletrack.blogspot.com.au/2013/07/a-pattern-to-make-product-to-be-proud-of.html

I have heard of that happening when people are starting to run low on ink. Could that be it? If not, perhaps there are some other settings in your printer driver you could choose. See if printing in color or with just black and white makes a difference. The grid lines are definitely there and should print for you!

Please keep me posted! I’m curious to hear how it goes. And it’s great to hear the PDF assembled easily. Cheers!

Is it a true double-faced fabric? Because if it is, you can separate the fabric at the edges and tuck the edges in between the layers before hand-stitching to finish it. The would allow you to create a fully reversible cape if you don’t mind hand sewing quite a bit. I just did a quick google search and found a couple of tutorials to help…[Read more]

Hey Johanna,

Very perceptive questions!

1. I gave you a little extra width in the skirt back placket for “turn of cloth” and because the testers felt it was a bit tricky to sew. It felt safer to have a little extra there, but if you match the crease to the line of stay stitching you’ll be fine.

2. With regard to the difference in width on the…[Read more]

That’s great to hear, @with-love-heidi! My mom made one with a laminate that she’s been using for a long time, too. I need to find time to make one for myself!

No, it’s fine. I prefer the sew-in interfacing for this project, but if you have fusible and want to use it go ahead. Enjoy!