lattemama

As Liesl mentioned, there was indeed a minor grading issue on Piece 3. It was most pronounced (about 1/4″) on the smallest sizes.

We have updated the digital pattern to fix the issue and have issued an errata notice which is now available…[Read more]

I took a quick glance at this and it appears to be a grading issue. My apologies that we didn’t catch it earlier. As soon as I have time I’ll address it and we’ll issue an errata, ok?

Perhaps this will help you get started? https://www.creativebug.com/classseries/single/fabrics-101

My seam ripper fell to the floor
I just heard a knock at the door
I never get peace
For sew/stress release
And I definitely need it some more!

New one:

Oh why is this fabric so blue?

@lisachawk so sorry to hear about your difficulties with the pattern.

That definitely sounds like something is off. Are you working with a digital copy of this pattern? If so, be sure to check the scale measurements on the copy you printed to make sure that it has been printed true to scale. You also might want to check the finished measurements…[Read more]

The upper bust/full bust thing works great for some people and not at all for others, unfortunately. It’s a general guideline that helps a lot of people to get a good fit, but if you’re wearing a DDD bra then clearly you’re not an A/B. From what I can see in the photos it looks like you’re getting a good fit. This is a loose-fitting shirt, so it…[Read more]

I’m sorry to say, but that’s one of the styles that we released as a digital pattern only, and we don’t have plans to have it printed. So, for now, it will only be available as a download.

Oh, I’m glad to see you here! I was a little worried that everyone had moved exclusively to the Facebook group, but this is such a nice community I hope you’ll stay. I just finished sewing all the samples for our fall photo shoot last weekend, and now I’m catching up on email before I dive into spring pattern development. Somehow I want to fit in…[Read more]

Woo hoo!
Hello lovely Peeps, we have joined the rest of the world and now have decent internet so I can finally access the forum again.
I have felt terrible wanting to help people but unable to reply.

I am not sewing, we are off on Hol’s, so I have tidied my sewing room in anticipation for my return (I will be hitting the Melbourne fabric…[Read more]

My seam ripper fell to the floor
I just heard a knock at the door
I never get peace
For sew/stress release

The lowest number listed is the number of the printing. So since your pattern, @4dfamily98, has a 1 that means it’s the first printing.

Maria,

You can find the errata page here:

https://oliverands.com/shop/sketchbook-shirt-shorts-sewing-pattern.html#tab-errata

@juliarhodes, did you check the finished measurements chart? That’s often the best way to determine which size you want to make, since it gives you the actual finished measurements which you can compare to your body and where you want the waistband to sit when it’s done. You might also want to compare it to other clothes that fit the way you like.…[Read more]

Sorry, what do you mean by in-line pockets? We cover lots of different pockets and pocket construction in the Building Block Dress book. Does that have what you need?

A raglan sleeve is really a patternmaking technique rather than a pattern alteration technique. It’s quite complicated. I’d suggest starting with a pattern like the Carousel Dress, like Lightning suggests, so you don’t need to draft the sleeve yourself.

I don’t know what PA glue is either. Ban-Rol is really designed for dressy men’s trousers, and it makes the waistband very stiff. So maybe the glue serves to secure the Ban-Rol to the fabric? You might want to find out. But the exact width of the stuff isn’t so important since you’ll pull threads to determine how wide your hem will be. Good luck!…[Read more]

I’m not sure if this will be the right width, but Amazon has it. If this is too wide, you could check there for other widths.

Ugh, wish I could help! I sort of freak out whenever my serger starts giving me problems. Sometimes, like with sewing machines, it helps to just re-thread it. But given how much I hate re-threading a serger, that’s no small task. Do you have a good local repair shop? It might be worth stopping by to see if they can offer advice and maybe a quick fix?

That sounds perfect! You can use the folded placket instead of the set-in placket to eliminate extra cutting and sewing. You might want to confirm the sleeve length with the cuff as well, and be sure the staystitch the neckline so it doesn’t distort while you’re trying it on. Good for you, making a muslin! It’s well worth it in the long run.