Nicole

Hi Maria! I had really good luck with Rijs textile in the Netherlands. They have a huge variety of colors and the texture and weight are very nice. Not very friendly, but nice fabrics. https://www.rijstextiles.com/en/

When we fitted this style we made a design decision that the waist looked better with negative ease. Patternmaking isn’t simply math–the aesthetics and fit and action of the fabric also come into play–and with knits this pattern simply looked and fitted better with a smaller waistline. Keep in mind, too, that with the waist ties the waist…[Read more]

Hi Anne,

Thanks for your patience. The numbers on the charts are correct, so let me see if I can explain the difference between the two size ranges for you. Each size range is developed and fitted independently, so the numbers in terms of ease, etc., aren’t directly related. In other words, we developed the misses size and fitted it to how we…[Read more]

@acs19 the charts do look a bit odd, but they are indeed correct. The two size ranges are built from completely separate blocks, and the patterns are quite different as a result. The expanded size range is much more curvy than the straight size range. If you fall into the sizes that overlap, you can choose which you think will best fit your shape.…[Read more]

similar question.

high Bust 39
Full bust 41
natural waist 39
Hips: 43

I am petite but round..

Hi Charmaine! Here is a sew-a-long with photographs of the steps. Does this help? https://oliverands.com/community/blog/2018/05/cartwheel-wrap-dress-sew-along.html

Hi @rainpatter Suzanne, you’ve already sewn the collar, right? Well this is the same.
You’re going to sew on top of your previous stitching, for a distance of about 1″, up to the dot and then pivot, and stitch around the curve of the cuff to the other dot.
The words “last 1 inch” are referring to the final 1″ of stitching where the sleeve cuff has…[Read more]

Holly, there’s always the option of purchasing the digital version and having it printed large format and mailed. This company does that.

http://www.pdfplotting.com/product/bw-pattern-printing/

Sure, as it happens I did a tutorial specifically to help with this issue! https://oliverands.com/community/blog/2012/10/fitting-a-muslin.html

You can do anything! I have French seamed the whole lullaby layette and it’s fiddly but definitely doable.
Baby clothes don’t get worn as many times as big clothes but they do get more washing per wear so I guess the finish needs to be somewhat durable.
A simple Zig zag stitch would be perfect.

You could try, but you’ll need to baste the fabric into place rather than fusing it, which means the interfacing won’t be adhered to the fabric. It would probably be ok, but I haven’t tried it on this pattern so I can’t say for sure.

Hi Vicki, sorry for the late reply. Since the elastic only goes around the sides and back you don’t need the full waist measurement of elastic.
I usually stitch one end in pace then try it on the kid before trimming the elastic and stitching the other end.
If I haven’t got the kid to hand then I adjust the elastic until the waist circumference of…[Read more]

Hi Lyndsey,
Have you typed your hip measurement correctly above? I notice it’s different on the image you attached.
If it’s as per the written then a 12 with any necessary bust adjustment would be fine.fwiw,I measure 38(same high/full)/30/40 currently and made a straight size 10. It’s comfortably loose in the top half but more fitted below. Hence…[Read more]

Short version of my long reply….

Use the instructions and pattern pieces that you have, and don’t worry if your instructions differ from what it says in the sew along.

(The pattern piece and the instructions go together. A minor change was made to both for a later printing, and that’s what’s reflected in the sew along. So don’t make any…[Read more]

Thanks Todd.
I must have the first printing too. So, will this mean that our placket actually is 1/4″ further in, as the centre front is only a 1/4″ off the cut line, but we’re going to sew the placket on with a 1/2″ seam?
I know 1/4″ is probably neither here nor there in a shirt with as much ease as this, but I’m curious…
If I follow the…[Read more]

Colleen, which printing of the the pattern do you have? You can tell by looking at the copyright box on both the pattern sheet and the instructions will tell you. Look for the smallest number you see there in the row of numbers. If the smallest number is 1, you have a copy from the first printing.

In the second printing, Liesl made a minor tweak…[Read more]

Good pick up and very good question.
I’ve got one cut out and ready to sew for the first time.
You’re right that the instructions differ. The cut line drawn on the pattern is certainly at the 1&1/4″ distance from the fabric edge.

I tend to follow the written instructions and never look at photographed sew alongs, but now you’ve got me…[Read more]

Hi EDB,
It’s nice to hear you have people looking out for you and time to sew!
Sleeve heads fitting into armscyes nicely is definitely a pattern designers forte. The sleeve from one pattern will almost certainly not go easily, if at all, into the armscye of another pattern.
If you’ve made the long sleeved classic shirt and the sleeve fits you…[Read more]