Classic Shirt Sleeve Cuff

Viewing 2 posts - 1 through 2 (of 2 total)
  • 4 years ago LINK
    Suzanne @Rainpatter

    I’m having a hard time figuring out the sleeve cuff of the classic shirt. I’m following along with the sew along. The instructions say to resttich the last 1″ of the cuff.

    Is that the 1″ of sewn area (so the 1/2″ seam allowance + the 1″) or 1″ total (1/2″ SA and then 1/2″ of the sewn area).

    4 years ago LINK
    Lightning McStitch @LightningMcStitch

    Hi @rainpatter Suzanne, you’ve already sewn the collar, right? Well this is the same.
    You’re going to sew on top of your previous stitching, for a distance of about 1″, up to the dot and then pivot, and stitch around the curve of the cuff to the other dot.
    The words “last 1 inch” are referring to the final 1″ of stitching where the sleeve cuff has just been sewn to the sleeve.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

copyright

Unless otherwise credited, all work on this blog is © Liesl + Co., Inc, 2008-2024. You are welcome to link to this blog, but please ask permission before using any text or images.