juliamom2009

Sorry, not ignoring you. I’ll reply just as soon as I get a chance to look into this, ok? Wearing too many hats right now…

Looking at the instructions and pictures again, and checking the true 1″ wide facing strip, I can only conclude there’s an error…
@liesl ? It works perfectly with the instructions and illustrations if the strip were even 1/4″ wider…
Currently you sew 1/2″ inch, fold over 1/4″ and that only leaves 1/4″ to cover the seam allowances. Yet the…[Read more]

To save modifying my comment again I’ll leave the error there for posterity 🙂
I was adding up to a strip of some width other than 1″ (1&1/2″ would be the sum of 1/2″+3/4″+1/4″)
Anyway, the short answer is: trim those seam allowances aggressively and maybe fold your raw edge over by slightly less than 1/4″
Apologies for the brain fade.

For your first question about adjusting the skirt: if you took the bodice in at the side seams I would do the same with the skirt. Simply because it makes the maths simpler.

The cuff question: you’re on the right track with your stitching but you’re imagining the next step differently to where the pattern is taking you. 🙂
The raw, unstitched…[Read more]

If you’re not taking in at the armholes this should be fine. You could also consider adding waist darts similar to the Fairy Tale Dress for a closer fit. But yes, tapering to the waist is perfectly fine!

Glad it worked out! I’ve adjusted the neckline for friends by lowering as well and it’s worked out just fine. Happy New Year!

Hi Veronica,

Sorry for the silence; we’ve been laid low with the flu! In general, a longer collar band will mean lowering the neckline, but I would suggest marking the desired neckline on your muslin and measuring that first. You can probably use the collar band and collar from a different size once you know the length of the the neckline itself.…[Read more]

Hi Denise, I think you have misread the instructions but have the right idea.
You construct one set of front, side and back panels out of fabric A, then the same out of fabric B (lining). Then the hood. Then sandwich it all together and stitch the periphery before turning it through an armhole.
Which step is it that you’re reading?

I hope it goes well! Please show us when you’re done, and I’ll check in from time to time to make sure you’re doing ok in the meantime.

Ah, and here’s a shop that sells Cone!

Denim Store

I’ve been using the denim the Robert Kaufman makes and I love it, but I’m not sure where to tell you to get it? They make many different weights, so it’s helpful to know denim or have access different types so you can feel it. Sadly, the Cone Denim mill in the U.S. has closed, but they make absolutely lovely authentic, durable denim if you can get…[Read more]

Hi Kathy, there’s a tutorial that shows how to make any bodice sleeveless here: https://oliverands.com/community/blog/2014/04/customizing-the-layette-sleeveless-bodysuit-tutorial.html
Do you have the Building Block Dress Book? Changes like this are also well described in there.
I think the shirts will look great without sleeves. Have fun!

I was hoping someone would reply to tell you they had tried this, but you must be the first one! I’ve lengthened the skirt to midi length and see no reason why it won’t work for maxi length. There’s plenty of sweep so you’ll be able to walk. Two words of advice: one, I would suggest checking the drape of your fabric to be sure it’s not TOO…[Read more]

Phyllis, there are two reasons we do this. The first is because, with so many sizes, the buttonholes get confusing when they’re laid on top of each other. The second is because I think it’s easier to transfer the markings once the placket is finished. Otherwise they get rubbed off during the sewing process or you might forget to include the seam…[Read more]

No worries, that’s what I’m here for! But thanks for the kind reply and I hope you’ll show us how it turns out. xo

Glad it worked out ok!

It sounds like you haven’t done anything wrong! Keep in mind that the back has extra ease (pleats) for better movement and comfort. Once you try on the muslin I think it will be fine. Keep us posted, ok?

You can reduce it as much as you want as long as you can still get it over your hips. I would suggest keeping an eye on the side panels so they stay at your sides and don’t pull too much toward the back or front.

I would suggest altering the neckline to suit her preferences and then using the Peter Pan Collar instructions in the Building Block Dress book to develop a new collar. This will be much simpler than trying to alter the collar that comes with the pattern. I hope that helps!

Sure, here’s a blog post on the topic to help!

lengthening and shortening a pattern