Lowering neckline

Viewing 4 posts - 1 through 4 (of 4 total)
  • 5 years ago LINK
    Sandy Naven @SandyN

    Hi
    I was wondering whether, if I kept the shoulder widths the same, I could lower the necklines of the Breezy Blouse enough so as not to need the back opening?

    5 years ago LINK
    Lightning McStitch @LightningMcStitch

    You certainly could Sandy. You might find you don’t need to adjust it much as I think from memory I can get mine on/off without undoing it. If you mark the centre front pattern piece half an inch or so lower then draw in a new curve meeting back at the same shoulder point. Just remember to lengthen your bias finishing tape as well

    5 years ago LINK
    Sandy Naven @SandyN

    Thank you, that is very helpful.

    4 years ago LINK
    Allison @karelaorange

    How did this work out for you? I was wondering something similar. I am only an amateur apparel sewer but have sewn many other things…. I just feel unsure about altering the pattern.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

copyright

Unless otherwise credited, all work on this blog is © Liesl + Co., Inc, 2008-2024. You are welcome to link to this blog, but please ask permission before using any text or images.