Button placement

Viewing 3 posts - 1 through 3 (of 3 total)
  • 7 years ago LINK
    Lyndsey Stanfill
    Moderator
    @madelouisville

    I just wanted to check. I know the button placement template says “copy placement to finished placket” but the template is much longer than my finished placket. Am I doing this correctly or should I have marked the placement before attaching?
    Thanks!

    7 years ago LINK
    Lightning McStitch @LightningMcStitch

    @madelouisville hi Lyndsey, the top corner of the button placket template should line up with the top corner of the finished button placket and then the buttonholes marked from there.
    From memory the template doesn’t really have a bottom, it just continues… So long as the lowest buttonhole is well and truly on your placket then you’re right. If not you’ve got the wrong size template!

    7 years ago LINK
    Lyndsey Stanfill
    Moderator
    @madelouisville

    Thanks! I thought that was right, but wanted to be sure before I made my buttonholes!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

copyright

Unless otherwise credited, all work on this blog is © Liesl + Co., Inc, 2008-2024. You are welcome to link to this blog, but please ask permission before using any text or images.