{"id":61822,"date":"2017-07-03T10:20:29","date_gmt":"2017-07-03T14:20:29","guid":{"rendered":"https:\/\/oliverands.com\/community\/?p=61822"},"modified":"2017-07-02T14:17:36","modified_gmt":"2017-07-02T18:17:36","slug":"popover-sundress-tutorial","status":"publish","type":"post","link":"https:\/\/oliverands.com\/community\/blog\/2017\/07\/popover-sundress-tutorial.html","title":{"rendered":"popover sundress tutorial"},"content":{"rendered":"

I love sewing the Popover Sundress<\/a>. It\u2019s my favorite Oliver + S pattern to sew. In the past few years I\u2019ve sewn over seventy! If you haven\u2019t sewn a dress before, this is the perfect project to start with. And you do know this is a free downloadable pattern, don’t you? Follow the link above to get your copy.<\/p>\n

\"Oliver<\/a><\/p>\n

Today we are going to be sewing it according to the step-by-step instructions with lots of photographs for those of you who like to work visually.<\/p>\n

Let\u2019s get started.<\/p>\n

NOTE:<\/strong> These instructions refer to the girl\u2019s dress with 1\/2″ seam allowances. The construction of the doll dress is the same, but seam allowances are 1\/4″ instead.<\/p>\n

Attach the Yoke and Construct the Dress<\/strong><\/p>\n

1)<\/strong> Align and pin one yoke to the top of one dress panel, with the right side of the yoke facing the wrong side of the dress panel. (You\u2019ll notice that the top of the dress panel is curved, which will help the dress, when worn, flare at the front and back instead of just the sides.) Stitch the yoke to the dress panel with a 1\/2\u201d seam.<\/p>\n

\"Oliver<\/a><\/p>\n

2)<\/strong> Press the seam flat to set the stitches; then press the seam allowances toward the yoke.<\/p>\n

3)<\/strong> Fold and press the opposite edge of the yoke 1\/2\u201d to the wrong side.<\/p>\n

\"Oliver<\/a><\/p>\n

4)<\/strong> Fold the yoke over the seam allowances to the right side of the dress panel, and pin the yoke\u2019s folded edge so it covers the stitching from Step 1. Press the yoke flat. Working from the right side of the dress panel, edge stitch the yoke to the dress panel.<\/p>\n

\"Oliver<\/a><\/p>\n

HINT:<\/strong> Slip a little rickrack or lace underneath the yoke edge before pinning and stitching. It\u2019s a great opportunity to add a little detail to the dress.<\/p>\n

\"Oliver<\/a><\/p>\n

5)<\/strong> Follow steps 1 to 4 above to stitch the second yoke to the second dress panel.<\/p>\n

6)<\/strong> With right sides together and the edges aligned, pin the two dress panels together at the side seams, and join each side with a 1\/2\u201d seam. Press the seam allowances open, and finish them as desired.<\/p>\n

\"Oliver<\/a><\/p>\n

\"Oliver<\/a><\/p>\n

HINT:<\/strong> The side seams would also work well as French seams<\/a>, if you prefer.<\/p>\n

Prepare and Attach the Sundress Straps<\/strong><\/p>\n

1)<\/strong> Fold one strap in half lengthwise, with wrong sides together; and gently press the fold to create a center crease, being careful not to stretch the bias-cut straps as you press it.<\/p>\n

\"Oliver<\/a><\/p>\n

2)<\/strong> Open the folded strap and lay it flat, wrong side up. Fold one of the strap\u2019s long raw edges in toward the center fold, and press a crease into this folded edge.<\/p>\n

\"Oliver<\/a><\/p>\n

3)<\/strong> Turn the dress wrong side out. Find the center of the strap by folding it in half, matching the short ends. Then pin the strap to the dress\u2019s armhole, positioning the strap\u2019s center point at the side seam and working toward the yoke, pinning the raw unfolded edge of the strap to the raw edge of the armhole. The right side of the strap will face the wrong side of the dress. Join the strap and armhole with a 1\/2\u201d seam. Take your time on the curve, taking care not to stretch the armhole as you stitch.<\/p>\n

\"Oliver<\/a><\/p>\n

4)<\/strong> Press the strap toward the seam allowances of the armhole. Where the strap\u2019s length extends beyond the yoke of the dress, press the strap\u2019s unfolded edge toward the strap\u2019s center fold, as you did with the folded edge of the strap in Step 2.<\/p>\n

5)<\/strong> Fold and press the short ends of the straps toward the wrong side by approximately 1\/2\u201d; then re-fold the strap in half and pin it so that the raw edges are sandwiched in the center fold.<\/p>\n

\"Oliver<\/a><\/p>\n

6)<\/strong> Re-fold the bias strip at the armhole so that it wraps over the seam allowances to the dress\u2019s right side, and pin the strap\u2019s folded edge from the right side so that it covers the seam line you sewed in Step 3.<\/p>\n

7)<\/strong> Working from the dress\u2019s right side, edgestitch the strap starting at one end, sewing down the strap, around the armhole, and up the other end of the strap, rotating at the ends to stitch across and give them a clean finish.<\/p>\n

\"Oliver<\/a><\/p>\n

Hem the Dress<\/strong><\/p>\n

1)<\/strong> Sew a line of basting stitches 5\/8\u201d from the dress\u2019s raw bottom edge. This will become the fold line for the hem.<\/p>\n

2)<\/strong> Fold and press the fabric\u2019s raw edge to the wrong side along the basting line.<\/p>\n

3)<\/strong> Tuck the fabric\u2019s raw edge inside the fold to meet the line of basting stitches and create a narrow hem. Press, then edgestitch this fold to finish the hem.<\/p>\n

\"Oliver<\/a><\/p>\n

4)<\/strong> Remove the basting stitches from the fold line.<\/p>\n

\"Oliver<\/a><\/p>\n

We hope you will share your fantastic Popover Sundress to our linky party.<\/p>\n

<\/p>\n

An InLinkz Link-up<\/a><\/div>\n